Method development and its validation for quantitative simultaneous determination of Latanoprost, Timolol and Benzalkonium chloride in ophthalmic solution by RP-HPLC
Abstract
Background and the purpose of the study: To develop a simple, rapid and accurate HPLC method for simultaneous quantitative determination of Latanoprost, Timolol and Benzalkonium chloride (BAK) in ophthalmic solution.
Method: Chromatographic separation was achieved with PDA detector using Inertsil C18, 300 x 3.9mm, 5µ reverse phase analytical column. The mobile phase consist of buffer: acetonitrile (40: 60 v/v), was passed through the column at flow rate of 1.0 ml/min. The method was performed at wavelength gradient .The experiment was carried out at 30oC.
Results: The calibration curves were linear in the concentration range of 25% to 150% of the working concentration (r2 > 0.999). The lower limit of quantification was 0.8, 0.9 and 0.6 for Timolol, BAK and Latanoprost respectively.
Conclusion: The developed procedure was used for simultaneous quantitative estimation of Latanoprost, Timolol and Benzalkonium chloride (BAK) in ophthalmic solution. Developed method was validated as per ICH Q2 (R1), and most useful for academic as well as industrial scale.
Key words: Latanoprost, Timolol, Benzalkonium Chloride, RP HPLC, Validation.Downloads
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).